steel pipe mould parrall Tissue Paper Tube Machine
Best setting
1,Tube Diameter: ID18.2 mm*OD29mm; ID28.2 mm*OD39.5mm;
ID39.5 mm*OD50mm;
2,Maximum paper length: 1200mm.
3,Paper thickness: 1~4mm.
4,Paper weight: 300g~600g/m2. With grind motor
5,Maximum paper diameter: 1300mm.
6,Maximum paper width: 1500mm.
7,Efficiency: 1200~1400 psc/h.
Parameter
| ID | CS16-1200 | CS16-1600 | CS16-1800 | CS16-3000 |
| Voltage | AC380±10% 50Hz |
| Pulley servo motor | 380V 3KW 2000R/Min |
| Rolling servo motor | 380V 3KW 2000R/Min |
| Paper feeding motor | 1.5KW 4 pole | 1.5KW 4 pole | 1.5KW 4 pole | 1.5KW 4 pole |
| Edge grinding motor | 1.5KW 2 pole | 1.5KW 2 pole | 1.5KW 2 pole | 1.5KW 2 pole |
| Dust removal motor | 1.5KW | 1.5KW | 1.5KW | 1.5KW |
| Paper lifting motor×2 | 1.1KW | 1.1KW | 1.1KW | 1.1KW |
| Total power | 13.5KW | 13.5KW | 13.5KW | 13.5KW |
| Input air pressure | >0.6MP |
| Gas flow | 2³m/h | 2³m/h | 2³m/h | 2³m/h |
| Processing length | 1200mm | 1600mm | 2000mm | 3000mm |
| Weight |
|
|
|
|
Size
mm | 6100×1635
×1500 | 6900×1635
×1500 | 7400×1635
×1500 | 8400×1635
×1500 |
Size+ Random Cutting
mm | 7750×1635
×1500 | 8550×1635
×1500 | 9050×1635
×1500 | 10050×1635
×1500 |
| Production efficiency: psc/h) | 1200-1500 | 800-1200 | 600-1000 | 500-900 |
The power supply of this machine is three-phase four wire 380V.
The New CS16-1200mm type machine EXW price is 22800USD
A SET AUTO PARALLEL PAPER TUBE MACHINE 21800USD AND A SET AUTO MIX GLUE MAHCINE 1000USD
YOVON CS16-400mm type Auto parallel Paper Tube Rolling Machine
1,Tube Diameter: ID7-30mm
2,Maximum feed into paper length to roll : 600mm.
3,Paper tube thickness: 1~3mm. ,Paper roller weight: 200g~500g/m2
4. With auto grind motor and label
5,Maximum paper width: 600mm. Max tube height: 400MM
6,Efficiency: 1200~1400 psc/h.
7,cut online min and max tube height: 50-400mm
8,Voltage : 380V 3KW 2000R/Min
hermocouple parall paper paper tube making machine
1. This machine is suitable for paper tube with small inner diameter, thick wall and high density (thermocouple paper tube, fireworks and firecrackers paper tube, oxygen regulator, sampler and other paper tube applications. It is widely used and in great demand.
2. The thermocouple flat coiling paper tube machine independently developed and produced by our company adopts segment-type up and down plate and roll-type flat coiling scheme.
3. The sectional upper and lower plate is different from the previous whole section of the upper and lower clamping roller, which is convenient to adjust the direction of the paper in the process of winding the tube, so that the paper is rolled from the middle to both sides, and the paper tube produced is flat and straight, no break, good burning resistance, high density (porcelain solid) and strong.
4. The characteristics of the rolling flat rolling scheme are that the paper tube produced is of high compactness (porcelain solid), high burning resistance, high binding force between layers, and no bubbles between layers.
5, can directly use the original large shaft paper of each paper factory, the base paper can be directly processed into flat roll paper tube without secondary processing. After the equipment is started, the large-shaft paper successively passes through the braking system, flattening system, gluing system, homogenizing system, paper feeding system, decelerating system, paper cutting system, paper feeding system, tube coiling system, tube pushing system, which is to make high-quality flat-rolled paper tube. The fastest process is 2-3 seconds, no manual control.
6, paper tube glue using corn starch glue, advantages: low price, high glue rate, good adhesion, simple operation and easy ratio, environmental protection, no pollution.
